The Silkland DP80 DisplayPort Cable review centers on a compact 1.6-foot cable designed for high-bandwidth connections between a DisplayPort graphics card and monitor.
Its 80Gbps DP 2.1 support is aimed at demanding gaming displays, though the short reach makes careful setup planning essential.
Silkland DP80 Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSilkland DP80 DisplayPort Cable
A compact DisplayPort cable for gamers pairing DP 2.1 equipment at a desk, especially when the shortest practical cable run is useful.
- VESA-certified DisplayPort 2.1 cable with up to 80Gbps bandwidth and UHBR20 support.
- Listed uncompressed modes include 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; with DSC enabled, the cable supports listed modes up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz.
- Supports VRR, FEC, ALLM, DSC 1.2a, MST, Dynamic HDR10+, 3D, and HDCP 2.3.
- Backward compatible with DisplayPort 2.0 and 1.4, and supports uncompressed audio pass-through in 7.1, 5.1, and 2.0 formats.
Pros
- High listed bandwidth and demanding resolution and refresh combinations suit current high-end display ambitions.
- Short length can keep a close PC-to-monitor connection tidy without a long unused cable run.
Consider before buying
- At 1.6 feet, it may be too short if the computer sits under a desk, behind a monitor arm, or off to the side.
- The highest listed modes depend on compatible source and display hardware, and some require DSC.
Read the full review summary
The DP80 combines a VESA-certified DisplayPort 2.1 connection, up to 80Gbps bandwidth, and a 1.6-foot length.
Its listed modes include uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; with DSC enabled, it lists higher modes such as up to 16K at 60Hz and 4K at 540Hz.
These are interface capabilities, not a guarantee that any particular computer and monitor will run at those settings.
This is a focused option for a close-together PC and monitor setup where the graphics card and display can both make use of DisplayPort 2.1 UHBR20.
The flexible compatibility claims and no-latch plugs may suit a gaming desk, while the brief cable length can help avoid excess slack.
Buyers should confirm their devices' ports, desired resolution and refresh rate, and the physical distance between connectors before choosing it.
The buying factors
Silkland DP80 Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Bandwidth headroom
The listed 80Gbps bandwidth and UHBR20 support target high-end DisplayPort setups.
High-refresh support
The description lists demanding refresh modes, including uncompressed 4K at 240Hz and 2K at 540Hz, with further modes when DSC is enabled.
Reach and placement
The short 1.6-foot length is useful for close connections but leaves little room for routing or repositioning.
Gaming features
VRR, ALLM, FEC, DSC 1.2a, and MST are listed for compatible equipment.
Build details
Tinned copper conductors, triple shielding, gold-plated connectors, and a nylon exterior provide concrete design details.
Setup flexibility
It is backward compatible with DisplayPort 2.0 and 1.4, but its short length and DP-to-DP connector format limit placement options.
Key Features and Specifications of Silkland DP80
- VESA-certified DisplayPort 2.1 cable with up to 80Gbps bandwidth and UHBR20 support.
- Listed uncompressed modes include 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; with DSC enabled, the cable supports listed modes up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz.
- Supports VRR, FEC, ALLM, DSC 1.2a, MST, Dynamic HDR10+, 3D, and HDCP 2.3.
- Backward compatible with DisplayPort 2.0 and 1.4, and supports uncompressed audio pass-through in 7.1, 5.1, and 2.0 formats.
- Male-to-male DisplayPort connectors, a 1.6-foot cable, and a no-latch plug design.
- Construction details include 28AWG tinned copper conductors, triple shielding, 24K gold-plated connectors, and a nylon exterior.
Pros and Cons of Silkland DP80
Pros
- High listed bandwidth and demanding resolution and refresh combinations suit current high-end display ambitions.
- Short length can keep a close PC-to-monitor connection tidy without a long unused cable run.
- No-latch plugs may be easier to disconnect where access is tight.
- A broad set of gaming and display features is listed, including VRR, MST, DSC, and HDR support.
Consider before buying
- At 1.6 feet, it may be too short if the computer sits under a desk, behind a monitor arm, or off to the side.
- The highest listed modes depend on compatible source and display hardware, and some require DSC.
- It is a DisplayPort-to-DisplayPort cable, so it will not directly connect to a device that only offers HDMI.
Who Should Buy Silkland DP80?
Good fit
Consider the DP80 if your gaming PC and monitor have DisplayPort connections, sit close together, and you want substantial bandwidth headroom for high-refresh or high-resolution use.
The listed support for VRR, DSC, and MST gives it relevant features for compatible gaming and multi-monitor configurations.
Measure the route between the ports, including any bends needed around the desk or monitor stand. A 1.6-foot cable is best treated as a deliberately short connection.
Before buying for a specific resolution and refresh target, check that both the graphics card and monitor support the needed DisplayPort version and mode; the description specifically recommends DP 2.1 UHBR20 on both ends for the fullest capability.
Who should skip it
Choose a longer cable if your tower and monitor are separated, or if you need room to move either device.
The DP80's compact reach is a poor match for setups that require routing around furniture or through a cable tray.
Look for a different connection type or an adapter solution if one device lacks a DisplayPort socket. Also avoid paying for DP 2.1 headroom when your actual display and graphics hardware cannot use the modes you want.
What the Silkland DP80 Means for a Gaming Setup
Bandwidth and display modes
The stated 80Gbps bandwidth and UHBR20 support place the DP80 toward demanding DisplayPort configurations. The range of listed modes spans uncompressed 4K at 240Hz through DSC-enabled higher-resolution combinations.
The practical mode depends on the source, display, and settings working together, so match the cable's capability to the ports and display mode you intend to use.
Gaming features in context
VRR, FEC, ALLM, and DSC 1.2a are included in the feature set, alongside Dynamic HDR10+ and HDCP 2.3.
These features can matter in a gaming setup, but support at the cable level does not establish that a particular game, graphics card, monitor, or configuration will use every option.
Check the relevant device specifications for the mode you want.
A short cable is a placement decision
The 1.6-foot length is the clearest practical constraint. It can keep a nearby monitor connection compact, but leaves little slack for a tower positioned below or beside a desk.
Measure from port to port along the intended route and allow room for gentle bends before ordering.
Construction and everyday handling
The cable uses 28AWG tinned copper conductors, triple shielding, gold-plated connectors, and a nylon exterior. The connectors have no latch, which may simplify removal in a tight space.
These design details are useful to consider when routing and handling the cable, though they do not replace checking fit and reach in your own setup.
Alternatives to Silkland DP80
One useful alternative is included because it offers a materially different cable length and bandwidth profile for a similar DisplayPort gaming setup.
Computer DisplayPort Cables alternative

7,000+ ratings
Read Amazon ReviewsSilkland 54Gbps 16K DisplayPort Cable, 10 ft
Choose the DP80 when your ports support its higher bandwidth and the devices are close together. Consider the 10-foot model when the longer reach matters more and its listed 54Gbps modes fit your display needs.
- This 10-foot Silkland cable lists 54Gbps bandwidth, uncompressed 4K at 240Hz, 8K at 120Hz, and DSC-enabled 16K at 60Hz.
- It also lists backward compatibility with DisplayPort versions 1.0 through 2.0.
- The DP80 offers up to 80Gbps bandwidth in a compact 1.6-foot cable, with listed uncompressed 4K at 240Hz and 8K at 60Hz modes.
Is Silkland DP80 Worth It?
The Silkland DP80 is worth considering for a close-range gaming setup that can use DisplayPort 2.1 bandwidth. Its 80Gbps rating, listed high-refresh modes, and gaming feature set make it a capable match on paper for compatible hardware.
The buying decision turns on two checks: confirm the source and display support the mode you want, and make sure 1.6 feet reaches comfortably along your cable route.
If either check fails, a longer cable or another connection format will be a better fit.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSilkland DP80 DisplayPort Cable
A compact DisplayPort cable for gamers pairing DP 2.1 equipment at a desk, especially when the shortest practical cable run is useful.
- VESA-certified DisplayPort 2.1 cable with up to 80Gbps bandwidth and UHBR20 support.
- Listed uncompressed modes include 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; with DSC enabled, the cable supports listed modes up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz.
- Supports VRR, FEC, ALLM, DSC 1.2a, MST, Dynamic HDR10+, 3D, and HDCP 2.3.
- Backward compatible with DisplayPort 2.0 and 1.4, and supports uncompressed audio pass-through in 7.1, 5.1, and 2.0 formats.